PROLIFIC USB TO SERIAL DRIVER DELL INSTALL
PROLIFIC USB TO SERIAL DRIVER DELL SERIAL

If you want to use the Radio Control features (main frequency tuning, mode, etc.), then you will need a separate CAT interface. This and other USB drivers we're hosting are 100 safe. Please note we are carefully scanning all the content on our website for viruses and trojans. NOTE: When using the SignaLink USB with programs that offer CAT control, the SignaLink will handle only the digital mode operations (PSK31, SSTV, etc.). This page contains drivers for USB-Serial Controller D manufactured by Prolific. If you do not want to purchase a CAT interface from the radio manufacturer (these are usually more expensive), then we suggest searching the internet for a compatible unit. We suggest checking your radio manual for the radio manufacturer's CAT interface part number (CI-V, CT-x, etc.).

PROLIFIC USB TO SERIAL DRIVER DELL SERIAL

If you want to control your radio (tuning, band/mode selection, etc.), then you will need a separate CAT interface. PL-2303 USB to Serial Bridge (H, HX, X) Installshield Driver Setup Program v3.3.3.114 for Windows Vista and Server 2008 (32-bit and 64-bit) v2.0.5.111 for Windows 2K/XP/2003 (32-bit) for Prolific USB VID067B&PID2303 Only. We have about 20 other workstations that are the same model with the same software and devices attached to them but this is the only one where that is showing.

PROLIFIC USB TO SERIAL DRIVER DELL INSTALL

Note: Only install this driver when you connect the Bridgemate Pro server to a USB port using the Aten USB-serial converter which is supplied with the Bridgemate Pro server.

The SignaLink USB is a sound card interface that provides the necessary hardware to operate all sound card digital and voice modes, but it does NOT provide the 'CAT' (Computer Assisted Tuning) hardware needed to control the radio. We have a Dell OptiPlex 3040 that is showing a Prolific USB-to-Serial Comm Port (COM3) in Device Manager and Devices and Printers. Version 3.4.62.295 of the Aten USB-serial converter driver has been successfully tested on 64-bit versions of Microsoft Windows 10/11. This Chinese Counterfeit PL2303 Scam has caused disruption amount MANY hobbyists, beyond amateur radio.Р”В¬an I use the SignaLink USB to control my radio, or will I need a separate CAT interface? Some of that cost is continual VCP driver writing and support for new OS, such as Win8. РІР‚вЂ№A majority of GOOD UBS to RS-232 cables cost $20 - $25 USD. IF this was a cheap BIG BOX < $10 USB to RS-232 cable, high priority it's the counterfeit PL2303.

IF you purchased your cable from West Mountain, then they have a web page for the proper VCP drivers. WHERE did you get this USB to RS-232 cable?! You state that you are running Windows 7 Home Edition, you MUST use Windows 7 VCP drivers (either the 32-bit or 64-bit version you are running) for the specific USB bridge chip in your cable.

You have not provided important DETAILS, that may be cause of your problem. WestMountain RigBlaster Pro uses a RS-232 (DE-9) connector / port.

Prolific usb to serial driver dell